Hemispherical Head Thickness (ASME)
Calculate the minimum thickness of a pressure-vessel hemispherical head by the ASME Section VIII formula, t = (P·r) ÷ (2·S·E − 0.2·P), from the internal pressure P (MPa), internal radius r (mm), allowable stress S (MPa) and joint efficiency E. Heads close the ends of a pressure vessel's cylindrical shell, and their shape is decisive for structural efficiency. The HEMISPHERICAL (half-sphere) head is the MOST EFFICIENT of all: since the sphere distributes pressure equally in all directions (uniform membrane stress), the hemispherical head needs only about HALF the thickness of the cylindrical shell of the same radius and pressure (compare the '2·S·E' in the denominator with the shell's 'S·E'). So it is the choice for high-pressure vessels. The drawbacks are costlier fabrication and greater height (more space). For moderate pressures and costs, elliptical (2:1) or torispherical heads, intermediate, are used. The head-type choice is a trade-off among thickness/material (cost), space and fabrication ease. This formula is fundamental in the complete vessel design, combining shell and heads. Enter the pressure, internal radius, allowable stress and joint efficiency.
Result
—
Espessura de tampo hemisférico (ASME)
A espessura mínima de um tampo (calota) hemisférico de vaso de pressão, pela fórmula ASME Seção VIII, é t = (P·r) ÷ (2·S·E − 0,2·P), a partir da pressão interna P, do raio interno r, da tensão admissível S e da eficiência da junta E. Os tampos (cabeçotes) fecham as extremidades do casco cilíndrico, e sua forma é decisiva para a eficiência estrutural. O tampo hemisférico (meia-esfera) é o mais eficiente de todos: como a esfera distribui a pressão igualmente em todas as direções (tensão de membrana uniforme), ele precisa de apenas cerca de metade da espessura do casco cilíndrico de mesmo raio e pressão (compare o '2·S·E' no denominador com o 'S·E' do casco). Por isso é a escolha para vasos de alta pressão. A desvantagem é a fabricação mais cara e a maior altura. Para pressões e custos moderados, usam-se tampos elípticos (2:1) ou toriesféricos, intermediários. A escolha do tipo de tampo é um compromisso entre espessura/material (custo), espaço e facilidade de fabricação. Esta fórmula é fundamental no projeto completo de um vaso, que combina casco e tampos. Informe a pressão, o raio interno, a tensão admissível e a eficiência da junta.
Related Tools
Torispherical Head Thickness (ASME)
Calculate the minimum thickness of a torispherical (standard flanged-and-dished) pressure-vessel head, t = (0.885·P·L) ÷ (S·E − 0.1·P), from the internal pressure P (MPa), the spherical crown radius L (mm), the allowable stress S (MPa) and the joint efficiency E. The TORISPHERICAL head is the most COMMON and economical head type in medium-pressure vessels (and universal in shallow tanks): it combines a central spherical crown (radius L) with a toroidal knuckle transition at the edge, joining the cylindrical shell — a form easier and cheaper to stamp than the hemispherical, and more compact (lower height). The 0.885 factor and formula hold for the standard ASME geometry with L ≈ D (crown radius equal to diameter) and the knuckle radius of 6% of the diameter. The price of the economy is a GREATER thickness than the hemispherical (the toroidal transition concentrates stress) and a critical knuckle region, where high bending stresses can arise. The torispherical head is the practical 'middle ground' between the costly hemispherical and the flat (which needs enormous thicknesses). This formula is essential in designing vessels with this head type. Enter the pressure, crown radius, allowable stress and joint efficiency.
Hemispherical Head MAWP
Calculate the maximum allowable working pressure (MAWP) of a pressure-vessel hemispherical head, MAWP = (2·S·E·t) ÷ (r + 0.2·t), from the allowable stress S (MPa), the joint efficiency E, the available thickness t (mm) and the internal radius r (mm). Each pressure-vessel component has its own MAWP — the maximum pressure IT withstands with its available thickness — and the WHOLE vessel's MAWP is the SMALLEST among all its components' MAWPs (shell, heads, nozzles), since the vessel is as strong as its weakest component. This formula gives the hemispherical head's MAWP, the inverse of that head's thickness calculation. The factor 2 in the numerator (versus 1 in the shell) reflects the greater efficiency of the spherical form: for the same thickness, radius and material, the hemispherical head withstands about DOUBLE the cylindrical shell's pressure. So in a well-designed vessel with hemispherical heads, the cylindrical SHELL is usually the component governing the vessel's MAWP (the weakest), and the heads have margin. Comparing the components' MAWPs identifies the weakest link and guides repairs and reinforcements. Recomputing MAWP with the remaining thickness measured at inspection is part of vessel integrity management. Enter the allowable stress, efficiency, thickness and radius.
Cylindrical Shell Thickness (ASME)
Calculate the minimum wall thickness of a pressure-vessel cylindrical shell by the ASME Section VIII Division 1 formula, t = (P·r) ÷ (S·E − 0.6·P), from the internal design pressure P (MPa), the internal radius r (mm), the material allowable stress S (MPa) and the welded-joint efficiency E (0-1). The pressure vessel — used in boilers, chemical reactors, heat exchangers, compressed-air and LPG tanks, autoclaves — is a CRITICAL safety component: a failure under pressure can be explosive and catastrophic. So its design is rigorously codified, the ASME BPVC (Boiler and Pressure Vessel Code) being the world's most used. This formula gives the minimum cylindrical-shell thickness to safely resist the circumferential (hoop) stress. The '−0.6·P' term refines the thin-wall formula for moderately thick walls. The joint efficiency E (0.70 to 1.0, per weld type and radiographic-inspection degree) penalizes strength at the welded region — fully radiographed welds have E=1.0, uninspected welds lower E. The corrosion allowance is added to the calculated thickness. This is the central pressure-vessel design calculation, and underestimating is inadmissible. Enter the design pressure, internal radius, allowable stress and joint efficiency.
The results provided by this tool are for general informational and educational purposes only and do not constitute professional, financial, medical, legal, tax or accounting advice. Always confirm important decisions with a qualified professional and official sources.