Follower Displacement (Parabolic)
Calculate the displacement of a parabolic-motion cam follower, in the first half of the rise, s = 2·h·(θ/β)², from the total lift h (mm), the cam angle θ (rad, current position) and the rise angle β (rad). In parabolic (constant-acceleration) motion, the first HALF of the rise has the follower accelerating uniformly, and its displacement grows with the SQUARE of the angle — hence 'parabolic' (the s vs θ curve is a parabola). The formula s = 2h(θ/β)² holds for θ between 0 and β/2 (half the rise); in the second half, the follower decelerates and the curve is an inverted parabola completing the lift smoothly to h. This motion is the cam analog of a body in free fall (constant acceleration): just as distance traveled grows with the square of time, here displacement grows with the square of angle. The parabolic construction produces the lowest maximum acceleration among simple laws, but with infinite jerk at the junctions (start, middle and end), limiting its use at high speed. This calculation gives the follower position at any point of the first half, useful for tracing the cam profile and for kinematic analysis. Enter the lift, the current angle and the rise angle.
Resultado
—
Deslocamento do seguidor (parabólico)
O deslocamento do seguidor de um came com movimento parabólico, na primeira metade da subida, é s = 2·h·(θ/β)², a partir da elevação total h, do ângulo de came θ (posição atual) e do ângulo de subida β. No movimento parabólico (de aceleração constante), a primeira metade da subida tem o seguidor acelerando uniformemente, e seu deslocamento cresce com o quadrado do ângulo — daí o nome 'parabólico' (a curva s × θ é uma parábola). A fórmula s = 2h(θ/β)² vale para θ entre 0 e β/2 (a metade da subida); na segunda metade, o seguidor desacelera e a curva é uma parábola invertida que completa a elevação suavemente até h. Esse movimento é o análogo, no came, de um corpo em queda livre (aceleração constante): assim como a distância percorrida cresce com o quadrado do tempo, aqui o deslocamento cresce com o quadrado do ângulo. A construção parabólica produz a menor aceleração máxima entre as leis simples, mas com jerk infinito nas junções (início, meio e fim), o que limita seu uso em alta velocidade. Este cálculo dá a posição do seguidor em qualquer ponto da primeira metade, útil para traçar o perfil do came e para análise cinemática. Informe a elevação, o ângulo atual e o ângulo de subida.
Related Tools
Max Acceleration (Parabolic Cam)
Calculate the (constant) maximum acceleration of a parabolic-motion (constant-acceleration) cam follower, a_max = (4·h·ω²) ÷ β², from the total lift h (mm), the cam angular velocity ω (rad/s) and the rise angle β (rad). Parabolic, or constant-acceleration, motion is the law producing the LOWEST possible maximum acceleration for a given lift and time — so it minimizes peak inertia forces. It consists of two halves: in the first, the follower accelerates with CONSTANT acceleration (rising parabolic displacement); in the second, it decelerates with the same constant (negative) acceleration, stopping at the top. The name 'parabolic' comes from the displacement diagram, formed by two parabolas. The great advantage is the low maximum acceleration; the drawback is that acceleration JUMPS abruptly — from +a_max to −a_max at the middle, and from zero to ±a_max at the ends — generating infinite JERK there, causing shocks, noise and vibration. So in practice pure parabolic is little used at high speed (despite low peak acceleration), and cycloidal or modified profiles that smooth these transitions are preferred. Parabolic is didactic and useful when peak acceleration is the limiting factor and speeds are moderate. Enter the lift, the angular velocity and the rise angle.
Follower Displacement (SHM)
Calculate the displacement of a simple-harmonic-motion (SHM) cam follower, s = (h/2)·(1 − cos(π·θ/β)), from the total lift h (mm), the cam angle θ (rad, current position) and the rise cam angle β (rad, ramp duration). A cam is a special-profiled mechanical element that, rotating, imposes a programmed motion on a FOLLOWER sliding or pivoting on it — the heart of engine valve trains, automatic machines, textile, printing and packaging equipment. Simple harmonic motion is a classic follower motion law: displacement follows a cosine, starting smoothly from rest, accelerating to mid-height and decelerating smoothly to rest at the top. It has continuous velocity and acceleration (no jumps), but acceleration is discontinuous at the ends (start and finish), causing a small shock — so SHM suits moderate speeds. The follower displacement diagram (s vs θ) is the starting point of cam-profile design: from it derive velocity, acceleration and jerk, which set the forces, vibrations and accuracy of the mechanism. Enter the lift, the current angle and the rise angle.
Follower Max Acceleration (SHM)
Calculate the maximum acceleration of a simple-harmonic-motion cam follower, a_max = (π²·h·ω²) ÷ (2·β²), from the total lift h (mm), the cam angular velocity ω (rad/s) and the rise angle β (rad). Follower acceleration is perhaps the MOST important parameter in high-speed cam design, since it generates the INERTIA FORCES (F = m·a): the higher the acceleration, the greater the force the cam must apply to the follower (and the reaction back on the cam and bearings), the greater the tendency to vibration and follower 'jump', and the greater the contact stresses. In SHM, maximum acceleration occurs at the ENDS (start and finish of the rise), and — crucially — it has a DISCONTINUITY there (jumping from zero to maximum instantly), causing a shock and exciting vibrations. So for very high speeds, CYCLOIDAL motion is preferred (its acceleration is continuous, starting and ending at zero), despite cycloidal having a slightly higher peak acceleration. Acceleration grows with the SQUARE of the rotation ω — so doubling the rotation quadruples the inertia forces, and high-rpm engine cams are a design challenge. Enter the lift, the angular velocity and the rise angle.
The results provided by this tool are for general informational and educational purposes only and do not constitute professional, financial, medical, legal, tax or accounting advice. Always confirm important decisions with a qualified professional and official sources.